Living room or bedroom, bathroom, kitchen floor, the clean light or not, has an absolute direct impact on the overall texture of the room; regular cleaning and maintenance, can prevent the floor surface in the long-term use of the opportunity to wear and prolong life.
Tools/Materials: Brooms, vacuum cleaners, wet and dry wipes, floor cleaners
1. Remove foreign matter and remove dust before cleaning the floor. No matter what kind of material is used on the floor, you should pick up foreign objects such as toys and buttons before sweeping, and then use a broom, vacuum cleaner, dust paper, or mop to remove dust, hair, and spider web from the floor surface, furniture, and corners. , especially entrances and gates leading to the outside of the house, where most of the dirty dirt comes from.
2, choose the right detergent. According to the floor material, choose suitable floor cleaners. Before use, according to the degree of contamination, pour the appropriate amount of floor cleaner into the bucket to dilute, and then drag the mop from the room to the doorway.
If it is corners or floor seams that are difficult to clean, you can use an old toothbrush to directly infiltrate the floor cleaner brush, or you can directly pour the floor cleaner on the rag and then rinse with clean water.
However, in some floor cleaners, the concentration of surfactants is relatively high. After being dragged to the ground, the semi-wet ground is more likely to be contaminated with dirt. As a result, the soil becomes more and more dirty. Therefore, special attention should be paid to selecting products with good reputation.
3. Keep the floor dry and smooth. Do not wipe directly with a wet mop. Use a floor-specific cleaner to clean it. Keep the floor moist and natural, and prevent cracking of the floor.
In order to prevent excessive moisture from penetrating into the floor and causing moldy and rotting, the mop should be wrung out as much as possible when using floor cleaners. If the surface is not coated, it should not be exposed to water. It is best to try it out in an unobtrusive place. After confirming that there are no problems, use it over a large area.
If you want to avoid long-term stamping and wear on the floor, you can always keep it shiny, and after the floor is cleaned, you can add a layer of floor wax maintenance agent. However, be aware that it is important to wait until the floor is fully air dried and then waxed so that the wax layer does not completely adhere to the floor. Instead, it gives the floor a little white spot. And it is best to use a flat sponge mop, so as to avoid the general mop cotton residue left on the floor with the agent.